Newbridge NB-SEMS-FRT Скачать руководство пользователя страница 43

Страница: 43 / 52

NB-SEMS-FRT User Manual Ver.1.0

Out Anti-passback

: After a user checks out, only if the last record is a

check-in record, the user can check out again; otherwise, the alarm will

be triggered. However, the user can check in freely.

In Anti-passback

: After a user checks in, only if the last record is a check-

out record, the user can check in again; otherwise, the alarm will be

triggered. However, the user can check out freely.

In/Out Anti-passsback

: After a user checks in/out, only if the last record

is a check-out record, the user can check in again; or a check-in record,

the user can check out again; otherwise, the alarm will be triggered.

9.6-

DURESS OPTIONS SETTINGS

If a user activated the duress verification function with specific authentication method(s),
when he/she is under coercion during authentication with such method, the device will

unlock the door as usual, but at the same time a signal will be sent to trigger the alarm.

Click Duress Options on the Access Control interface.

Items

Descriptions

Alarm on Password

When a user uses the password verification method, an alarm signal will

be generated, otherwise there will be no alarm signal.

Alarm Delay (s)

Alarm signal will not be transmitted until the alarm delay time is elapsed.

The value ranges from 1 to 999 seconds.

Duress Password

Set the 6-digit duress password. When the user enters this duress

password for verification, an alarm signal will be generated.

Содержание NB-SEMS-FRT





















































Результаты поиска

Содержание NB-SEMS-FRT

Отзывы:

Бренды по названию

Популярные бренды

Newbridge NB-SEMS-FRT, Руководство пользователя

Результаты поиска

Содержание NB-SEMS-FRT

Отзывы:

Бренды по названию

Популярные бренды