insensitive used
out
the signal are
influenced
battery
3. apart
away
signal
disturbance
2.
PC MODE
1. Image excursion
Select correct refurbishment and resolution rete
2. Lose colour
Please check the VGA cable if connect aorrectly ,or what is the
matter with the VGA cable ,if any bend or broken in cable, plase
adopt new VGA cable
3. No picture
A. After connect the power ,the indicate light will turn red,then
press”POWER” button ,the unit will work ,if the screen display “NO
SIGNAL”, that is to say no signal input,at this time ,you should open
your computer;if the screen display “OVERRANGE”,that is to say
signal mode input beyonds the range of display,please adjust the the
refurbish rate of unit.
B.if the green light on the monitor is turned on,the management
mode of the power isactivated.You may press any key on the
computer to activate it.The power of the monitor also has the
management mode,If on effect after pressing the keyboard of the PC
please press “POWER” key on the monitor
C. If theindicate light is turn off,please check the power conection
4.No clear or ready image,shaky picture
Please select correct resolution rate ,renew the refurbishment rate
5.If there are still some problems , you may connect with the rebated
dealers.
Remark:
I. If happen image interruptive , it is possible that the VGA signal
frequency isn’t matche with normalstandard
II. It isnomal that some line will appear on the screen ,when you
turnoff the unit
III. To ensure a longer use , please make Power management
function of PC active.
13
