press “+/-“ on the unit or “
/
”on the remote controller
to adjust.
: Select this function to choose the color system in AV mode.
Such as: NTSC, M; PAL, 4.43, 60HZ; NTSC, 4.43, 60HZ;
PAL, M; NTSC, J; AUTO.
: To exit
TV CHANNEL: AUTO SEARCH, MANUAL SEARCH , EXCHANGE
CHANNEL,FINE CHANNEL , AUTO, INERCARRIER SOUND ,EXIT.
“AUTO SEARCH “
: To search TV channel automatically, after selecting this
function press “+/-“ on the unit or “</>”on the remote controller and it will start
to search TV channel from low to high or from high to low meanwhile it will
store the TV channel automatically. Note while the TV is searching
automatically, it is in a mute state.
MANUAL SEARCH:
If you ‘d like to search TV channel by yourself you can
select this function to search TV channel manually then press “+/-“ on the unit
or “</>”on the remote controller and it will start to search TV channel . It will
stop searching automatically when there was a TV program searched and
stored, press MENU button to confirm and you can repeat the operation as
mentioned to search other programs.
EXCHANGE CHANNEL:
Exchange channel choose the function, screen will
display as image:
CURRENT CHANNEL:
display the
number of current channel (e.g.: 9)
EXCHANGE CHANNEL
CHANGL TO :
It is to input new number
of current channel you like (e.g.:12)
CURRENT CHANNEL 9
Press ‘’
＋／－
’’ or “ </> “button on
the remote controller to choose new number, then press MENU to confirm,
is to set the double-digit or three-figure number. For example: To set 12, just
press
and then input 1 and 2 . Or press
twice to set a three-figure
number ,256 for instance press
twice then input 2, 5, and 6 in turn then
press
again to exit
CHANGL TO 12
FINE CHANNEL
: The FINE CHANNEL is to correct the weak signal and the
nonstandard TV signal stored .
After select it press – or V- for lower limit fine tune. Press + or V+ for high
fine tune. Note, the relative button should keep pressing till the good signal
received.
