NewAire 852551003227 Скачать руководство пользователя страница 7

— 7 —

AC CONNECTION

u

  Plug into properly 

installed and 
grounded three-
prong outlet. See 
safety precautions as 
follows.

STANDARD OPERATION 

u

  Press the Power Switch to the ON position and the 

Hydroxyl Ozone Generator will operate continuously 
until the Power switch is set to OFF. The Continuous 
indicator will light when the switch is set to ON.

 

NOTE

: The Ozone feature cannot be used while in 

the Continuous mode. 

 

When done, press the Power Switch to the OFF 
position and the fan and UV bulbs will turn off.

Operation

Grounding Instructions 
THIS APPLIANCE MUST BE GROUNDED.

  

In the event of an electrical short circuit, grounding 
reduces the risk of electric shock by providing an 
escape wire for the electric current. This appliance is 
equipped with a cord having a grounding wire with 
a grounding plug. The plug must be plugged into an 
outlet that is properly installed and grounded. 
•   Plug into properly installed and grounded three-

prong outlet. 

•   DO NOT remove ground prong. 
•   DO NOT use an adapter.

Power Supply

 

•  Extension cords can be used only if:
  (1)  the marked electrical rating of the extension 

cord is at least as great as the electrical rating of 
the appliance, 

  (2)  the extension cord must be a grounding-type 

three-wire cord, and 

  (3)  the longer cord should be arranged so that it 

will not drape over the countertop or tabletop.

3-Pronged Plug

Ground Plug

3-Prong Receptacle

Содержание 852551003227


















Отзывы: