6
newair.com
OPERATING INSTRUCTIONS
Before turning on the heater:
1.
Check if the power cord is in good condition.
2.
This heater runs on 120V AC and the bearing capacity of the product
socket is no lower than 12.5A; otherwise, issues could arise that result in
injury.
Pilot Light
The Pilot Light will light up if the machine is powered on.
Temperature Control Knob
Insert the plug into the power socket, then turn the Temperature Control knob
clockwise until you hear a click, indicating that the temperature controller is
on. Then, adjust the dial to your desired temperature level. The temperature
options range from 41 to 95 degrees.
Power Selection Knob
Use the Power Selection knob to select between 4 functions: Low (800 Watts),
High (1,500 Watts), Low Oscillation (800 Watts with oscillation) and High
Oscillation (1,500 Watts with oscillation).
Turning off the Heater
A.
Turn the Power Selection knob to the OFF position.
B.
Turn the Temperature Control Knob all the way to MIN.
C.
Unplug the power cord, and refrain from storing the heater until the unit
has fully cooled.
