12
newair.com
USEFUL INFORMATION:
After plugging in the unit, press the “ON/OFF” button for
more than five seconds, then release to start the unit. The unit will add three minutes
to each ice making cycle automatically to thicken the ice cube. If you want to thicken
your ice cubes, turn off the unit first, then press the “ON/OFF” button again for more
than five seconds to turn on the unit again.
4. While the ice maker is on, verify the water level of the internal tank located
underneath the ice basket periodically. If there is not enough water to last the ice
making cycle, the unit will automatically let the water flow from the big water
reservoir downward to the internal tank to continue the ice making process. If both
the internal water tank and big water reservoir do not have enough water, the ice
maker will stop automatically and the “ADD WATER” indicator will be on.
Note: Check to be sure that both the water filter located at the bottom of the
big reservoir and the internal water tanks are not blocked by a foreign
substance.
5. The ice maker automatically stops working when the ice basket is full and the
“FULL ICE” indicator is on.
6. Change the water in the water reservoir every twenty-four (24) hours to ensure you
are using clean water. If the unit is not in use for a long time, drain all the water
that is left in the water tank and the water reservoir.
