7
A Name You Can Trust
INSTALLATION
This humidor is freestanding unit and should not be installed inside a cabinet or
other built-in enclosure.
For proper ventilation, allow 5 inches clearance between the back of the unit
and any adjacent walls.
Before operating your cigar humidor for the first time, follow these steps:
•
Before connecting the unit to a power source, allow it to stand upright for
approximately 2 hours. This will reduce the possibility of any system
malfunctions which may have occurred from handling during transportation.
•
Clean the interior surface of the unit with lukewarm water and a soft cloth
but do not get the wood wet.
•
Place the humidor on a level surface that will be strong enough to support
the unit when it is fully loaded. To level your humidor, adjust the front feet
located at the bottom of the unit.
•
Install the humidor away from direct sunlight and heat sources such as
stov
es, heaters, or radiators. Direct sunlight may affect the unit’s acrylic
coating, and nearby heat sources can increase electrical consumption.
Extreme cold or hot ambient temperatures may also prevent proper
performance.
•
Please note: this humidor is only designed for home use, and is not designed
to be placed in a garage, basement, or outdoor area
F
ACTORY
O
DOR REMOVAL
Wash the interior of the humidor with a mild detergent and warm water. Make
sure to not get the wood wet. Leave the door open and allow it to air dry
thoroughly. If a “plastic” smell persists, place a dish of baking soda in the unit or
stuff the humidor with newspapers overnight. When finished, let the unit run a
full day to complete the airing out process.
D
RAWER
S
ET
-
UP
The drawers and shelves included with this humidor are designed to sit flush
with the front edge of the cabinet. This will allow air to circulate freely through
