8
http://www.NewAir.com
After turning on the wine cooler, the LED display will show the ambient
temperature first, and then the internal cabinet temperature.
After you set the desired temperature, this set temperature will flash for 5
seconds on the display and then revert back to the internal cabinet
temperature.
CLEANING & MAINTENANCE
CLEANING YOUR COOLER
To clean your cooler:
Unplug the cooler and remove anything inside.
Wash the inside of the unit with a solution made of warm water and baking
soda (2 tablespoons of baking soda to one quarter of water).
Unscrew the water reservoir at the bottom of the unit and rinse with water.
To clean the outside of the unit, use a mild detergent and warm water.
MOVING YOUR COOLER
To move your cooler:
Remove anything stored inside.
Securely tape down all loose parts located inside the unit.
Turn the leveling feet up to the base in order to avoid damage.
Tape the door shut.
Be sure the cooler stays in an upright position during transportation.
