NewAir AC-14100E Скачать руководство пользователя страница 14

Страница: 14 / 15

TROUBLESHOOTING

The air conditioner does not work.

Is the air conditioner plugged in?

Is the power outlet functioning correctly?

Is the full water tank indicator light flashing?

Is the ambient room temperature lower than the set
temperature?

The unit does not produce adequate
cooling.

•

Is the unit placed in direct sunlight? If so, close any
curtains or move the unit to a more shaded area.

•

Are there too many windows or doors open?

•

Are there too many people in the room?

•

Are there additional heat sources in the room?

•

Is the filter dusty or dirty?

•

Is the air inlet or air outlet blocked?

•

Is the ambient room temperature lower than the set
temperature?

The unit is noisy.

Is the machine positioned unevenly?

Is the unit positioned on an even, solid surface?

The compressor does not work.

Is the compressor

’

s overheat protection function

activated? If so, wait for the temperature to drop
and then turn on the unit again.

☆

Never try to repair or dismantle the unit yourself. Unauthorized repairs can

void your warranty and endanger the user.

Содержание AC-14100E
















Результаты поиска

Содержание AC-14100E

Отзывы:

NewAir AC-14100E, Руководство пользователя, Страница: 14 / 15

Результаты поиска

Содержание AC-14100E

Отзывы: