INSTALL INSTRUCTIONS
TOOLS AND PARTS REQUIRED:
Gather the required tools and parts before starting installation.
TOOLS NEEDED:
• Adjustable wrench or pliers
• 12” Magnetic Level
• #2 Philips Bit
• Cordless Power Drill with 7/16th socket attachment
• Tape Measure
• Stud Finder
• Pencil
• Hammer Drill with Masonry Bit (optional)
READ THE COMPLETE INSTRUCTIONS BEFORE
UNPACKING CABINETS
PARTS AND HARDWARE SUPPLIED
WITH CABINETS:
Parts
Base
Locker
Wall
“Base cabinets” include 2 Door Base, 3 Drawer Base and 2 Door Base with Drawer
Height-Adjustable Steel Leveling Legs
4
4
0
5/8” L x ¼” W Zinc Plated Bolt ( Philips Head)
16
16
0
Hex-Head Nut
16
16
0
Foot Plate Washers
16
16
0
#8 x 5/8” Wood Screw, Round Head with
Washer, Deep Thread with Speedpoint
4
0
0
Drawer Keys
1
1
1
Full Width Adjustable Shelves
1
3
1
2.5” L X ¼” W Cabinet Mounting Lag Bolts
(7/16th HEX HEAD)
2
4
4
Large Fender Washers
2
4
4
UNPACKING OF THE CABINETS:
•
Begin by placing the cabinet on a sound level surface.
•
Remove all cardboard and foam packaging material.
•
Remove clear plastic bag.
•
Dispose / recycle all packaging materials.
•
Remove and verify all the contents in the box. See “Parts and
Hardware Supplied List”
REMOVE THE LOCKER DOORS FIRST
Note: Applicable when base and wall cabinet are packed
inside the locker cabinet
To remove the base and wall cabinet from the inside of the
locker, the locker doors must first be unhinged and removed.
To do this, pull down on the tab at the inside top of the
locker door. Once the tab is pulled down, the L-shaped
door hinge can be slid down and the door can be removed
from the locker.
BE CAREFUL NOT TO LET THE DOOR FALL
FORWARD
, as this may cause injury. This can be done for
both doors. The base cabinet and wall cabinet can now be
removed from the locker.
To re-install the doors, repeat the process in the opposite
order. First fit the door’s bottom hinge into the hole in the
bottom of the locker frame. Re-insert the upper door hinge,
and then align the hinge with the hole in the top of the locker
frame. When these are aligned, you can push the tab back
upwards and the hinge will be secured in place.
STEEL WELDED BOLD AND DIAMOND PLATE SERIES
NEED
MORE
INFORMATION
?
TRY
, 1 877 306 8930
FOR
ANSWERS
TO
COMMONLY
ASKED
QUESTIONS
.
