Mounting Locker
(Drywall/Studded Wall)
1
Gather parts.
2
Use stud finder to locate the studs
and mark the wall with a pencil.
4 X
Wall Screw
(1/4” x 21/2”)
4 X
Wall Washer
(1/4”)
Level cabinet
Align cabinet
to stud marks.
• Follow steps 1 to 5.
• Drill 4 pilot holes through the
perforated strip with hammer drill &
masonry bit.
• Use 4 x (2 ¼” x ¼” )Tapcon Concrete
Anchor into wall. (Not Included)
• OR 4 x (
#10 x 2” )Screw with 3/16”
masonry plug into wall. (Not Included)
• Follow Step 6.
4
3
5
Place cabinet tight
against the wall.
X4
6
Masonry.
Drill 4 wall screws and washers
through perforated holes into studs.
Warning
Always secure locker to the wall.
Failure to do so can result in injury.
