Install InstructIons
24 GAGE STEEl RTA BASE CABINET
A
B
G
A
B
A
B
H
I
C
D
E
F
1.
Use the M5 screw and M5 nut to
assemble the two back panels.
2.
Assemble the left and right
side panel with the same
screw and nut. D Goes on
the outside of E, and C goes
on the outside of F.
3.
Panel A sits on
the outside of
E and F, and on
the inside of C
and D.
4.
Flip the cabinet over. Use M8
screw, washer and M8 nut
to assemble the adjustable
legs on the bottom panel.
6.
Put the plastic
washer in the holes
at the four corners.
7.
Assemble the right and left
doors and insert hinges
into the plastic washers.
Bend down the clips to fix
the hinges in place. Extra
spacers are provided to
ensure doors are level.
5.
Turn the cabinet back upwards,
then insert the shelf.
If shelf tabs are not catching
with the inside
of panels D
and C, pull the
shelf notches
outwards.
need
more
information
?
try
,
WWW.NEWAGEPRODUCTS.COm
or
1 877 306 8930
for
answers
to
commonly
asked
questions
.
