NEW VISTA NV1294, Руководство по эксплуатации и обслуживанию

Страница: 7 / 11

7
J Tool Adapter for Ring Tools
for external threads
J Tool Adapter for BH Gages J to FP Adapter
Figure 9
These compliant tool adapters can
accommodate ring gages for thread
verification and dies for light chasing of
threads.
Figure 10
Type BH Gages allow for compliance in
larger size gages or in especially deep
threads.
Figure 11
This adapter allows standard type FP
tool adapters to be used on an RT
equipped with a Type J chuck.
Tool Changeover
Both Type FP and Type J tool adapters are designed to be easily changed.
To Engage a Tool Adapter
Align shaft of chuck with the hole in the center of the toolholder then push the tool adapter into
the chuck. Twist the tool adapter in either direction while you are pushing. This helps the drive
pins align with the slots in the toolholder
Figure 12
Twist the tool adapter while inserting it into the chuck.