NRP2000/W IP Phone User Manual
New Rock Technologies, Inc.
16
Press
key and talk with callers by built-in Micro-phone and Speaker. If you want to hang up,
please press
key again. Switch calling or talking into handset mode by lifting the handset under
speaker mode. Press
key will switch calling or talking into headset mode.
C. Answer by headset
Keep your microphone connected with the RJ9 headset jack, when there is an incoming call, press
and talk with the caller. If you want to hang up, please press
again. Pressing
can change calling or talking into speaker mode, and lifting the handset switches to handset
mode.
3.2
Make Calls
A Use the handset
Pick up the handset, the LCD will show the current lines (user is able to switch from line1 to line 6 by
pressing the line key beside the LCD). Press soft key "
Send
" to dial the number. When you hear the tones of
“du~~du~~” and the phone number your dialed is being displayed on the LCD, the remote phone should be
ringing. If the called party answers this calling, the call is established and the calling timer is started
immediately.
B. Use the speaker
Press
key, the LCD will show the current lines (user is able to switch from line1 to line6 by
pressing the line key beside the LCD). Input the phone number and press soft key "
Send
" to dial the
number. When you hear the tone of
“du~~du~~” and the phone number your dialed is displayed on the LCD,
it indicates that the called party is ringing. If the called party answers this call, the call is established and the
calling timer is started immediately.
C. Use the headset
Press
key, the LCD will show the current lines (you can switch from line 1 to line 6 by pressing
the line key beside the LCD). Input the phone number and press the soft key "
Send
" to dial the number.
When you hear the tones of
“du~~du~~” and the phone number your dialed is being displayed on the LCD, it
indicates that the called party is ringing. If the called party answers this call, the call is established and the
calling timer is started immediately.
