NEW6210
5
NEW POS Technology limited
Product manual
7.
* During card swiping,
* Swipe the card at steady speed.
Swiping a Magnetic Stripe Card
the magnetic stripe should be downward and face the
LCD of terminal,swipe it through the slot located on the right side of the
terminal bidirectionally;
Note
During swiping, keep the lower edge of the magnetic stripe card horizontally
with the card guiding surface. Or it maybe lead to swiping card error.
8. Contactless card (optional)
* For top tapping card,contactless card antenna inductive zone is located on the space on
the LCD. Tap the contactless card above the LCD horizontally for some seconds. The
buzzer will prompt the cardholder the completion of transaction.
Top tapping contactless card
How to swipe card
NEW6210
6
NEW POS Technology limited
Product manual
9. Insert user smart card
* Insert smart card with the gold-colored contact surface facing up into the card
slot. View LCD ICC card icon to determine if IC card is inserted into its place.
If the IC card icon is switched on, it indicates OK. While the icon is off, please
confirm whether gold-colored contact surface of card is facing up and IC card
is inserted into its place.
10. Battery Charge
* Remove the back cover of the device . Insert the rechargeable battery.Slide the
back cover into its place.(If the rechargeable battery is in the device, the step
is unnecessary.)
* Please connect the big end of the USB cable to AC power supply and small end
of cable to the miniUSB Port on the left side of terminal. Plug the power supply
in the wall socket. The LED indicates in red showing the charging in progress,
while the LED turns green indicating the charging completion.
Note
If the device is in power-off state, only LED indicator on the left side of device
shows battery charge status. While the device is in power-on state. Battery
icon on the LCD display also indicates the battery charge status.
Insert user smart card
11. How to connect the stylus to the terminal
* Take out the cable from the bag with specification,and connect the stylus and
terminal with the cable to prevent the loss of stylus.