EN - 17
below.
1.
Open the oven door.
2.
Open the locking catch (
a
) (with the aid
of a screwdriver) up to the end position.
a
3.
Close the door until it almost reaches the
fully closed position and remove the door
by pulling it towards you.
Removal of the Wire Shelf
To remove the wire rack, pull the wire rack
as shown in the figure. After releasing it
from the clips (
a
), lift it up.
5.2 Maintenance
WARNING:
The maintenance of this
appliance should be carried out by an
authorised service person or qualified
technician only.
Changing the Oven Lamp
WARNING:
Switch off the appliance
and allow it to cool before cleaning
your appliance.
•
Remove the glass lens, then remove the
bulb.
•
Insert the new bulb (resistant to 300 °C)
to replace the bulb that you removed
(230 V, 15-25 Watt, Type E14).
•
Replace the glass lens, and your oven
is ready for use.
The lamp is designed specifically for
use in household cooking appliances.
It is not suitable for household room
illumination.
a
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
T2
5
4
3
2
1
T1
•
Insert the accessory to the correct
position inside the oven.
•
Allow at least a 1 cm space between the
fan cover and accessories.
•
Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
•
The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
•
Trays and wire grids can be positioned
on any level from 1 to 5.
•
Telescopic rails can be positioned on
levels T1, T2, 3, 4, 5.
•
Level 3 is recommended for single level
cooking.
•
Level T2 is recommended for single
level cooking with the telescopic rails.
•
The turnspit wire grid must be
positioned on Level 3.
•
Level T2 is used for the turnspit wire
grid positioning with telescopic rails.
****Accessories may vary depending on the
model purchased.
Содержание NWH400B
Страница 58: ...52294982...