2.6. Fitting the machine undercounter
If you wish to fit your machine undercounter,
there must be sufficient space to do so and
the wiring-plumbing must be suitable to do
so (
1
). If the space under the countertop is
suitable for fitting your machine, remove the
worktop as shown in the illustration (
2
).
WARNING:
The countertop, which the
machine will be placed under, must be
stable in order to prevent imbalance.
The top panel of the dishwasher must
be removed to fit the machine under the
countertop.
To remove the top panel, remove the screws
that hold it on, located at the rear of the
machine. Then, push the panel 1 cm from
the front towards the rear and lift it. Adjust
the machine feet according to the slope of
the floor (
3
).
Fit your machine by pushing it under the
counter taking care not to crush or bend the
hoses (
4
).
WARNING:
After removing the top
panel of your dishwasher, the machine
should be placed in a space of the
dimensions shown in the figure below.
H1: min A
H2: min B1
H3: min B2
A
B
All
Products
B
1
B
2
Product’s Height
(±2 mm)
820 mm
830 mm
835 mm
A:
If there is no felt on the top of the
product; you should take into account this
product’s height.
B1
: If there is felt on the top of the product
with 2nd basket; you should take into
account this product’s height.
B2
: If there is felt on the top of the product
with 3rd basket; you should take into
account this product’s height.
EN -
8
