Models:
Travel Berkey
Big Berkey - Royal Berkey
Imperial Berkey
Crown Berkey™
®
®
®
®
Introduction:
Now that you have bought your
water purifier, you have
taken the first step toward protecting you and your family from disease causing
viruses, pathogens, parasites, harmful chemicals, heavy metals
and other
waterborne contaminates.
water
purification elements
®
The ease of operation of this unit combined with a proven effectiveness
at eliminating waterborne diseases and contaminates, has led to
being specified for field operations by many of the world’s
major aid and emergency relief organizations.
®
Berkey
Berkey
Contents:
1- Upper Chamber
1- Lower Chamber
1- Spigot, nut and two washers
0-6 Blocking Plugs
system
Fit the
onto the
by inserting the
up through the hole in the lid and
screwing on the knob. Hand tighten only.
Prime
purification elements
Place the large sealing
over the threaded
of the
Place the
into the hole in the base of the
.
Secure element in the chamber base by screwing on the
onto the threaded
mount. Repeat #4, 5 & 6 until all elements have been installed.
For systems having more element holes than purification elements, (Expandable systems)
secure
into empty holes. NOTE: Blocking plugs may vary; insert rubber
plugs into each empty hole, screw together white blocking plug (top & bottom).
Place the
onto the threaded portion of the outlet
with
the beveled side facing the system hole and the flat side facing the spigot.
Insert thread of
through hole in the side of the
Place the
over the thread within the chamber and secure in place with the
. Tighten
securely by hand only. For the last 1/4 turn, hold the nut in place and gently turn the spigot
until it is tight.
Place the upper
onto the lower
Assembly Instructions:
.
.
C.
D.
E.
F.
G.
H.
I.
J.
K.
knob (1)
lid (2)
screw (3)
washer (10)
portion
element (5.)
element (5)
upper chamber (4)
wing nut (11)
blocking plugs (12)
beveled exterior washer (8)
spigot (7)
spigot (7)
lower chamber (6).
flat
washer (8)
nut (9)
chamber (4)
chamber (6)
Black Berkey
(see reverse side of instruction Sheet).
and place
in position.
lid (2)
1- Lid, knob and screw
1- Priming Button
1- Assembly instruction sheet
(depending on model)
2-8 Purification elements, wing nuts and washers (depending on model)
Assemble your
system as cleanly as possible. Extreme cleanliness is important.
Wash your hands and
before proceeding to assure that contamination of
the components does not take place during assembly.
You can run a few batches of water through your
system and then use
the filtered water to clean your hands and your system.
Remove the purification elements and parts from their protective packaging checking each
item against the above list.
A
B
Berkey
Berkey
Berkey
Note:
Note: The number of elements supplied will depend on the type
of unit ordered.
®
®
®
®
IMPORTANT OPERATIONAL NOTE:
When lower chamber is partially filled, be cautious not to overfill upper chamber as this could cause lower
chamber to overflow. For example, if the lower chamber is 1/3 full the upper chamber can be refilled by 2/3rds, if
the lower chamber is ½ full, the upper chamber can be refilled by ½, etc.
Assembly Instructions - Front - -Stainless - 01-18 - © Copyright - 2002-2018 - New Millennium Concepts, Ltd. All rights Reserved.
NEW MILLENNIUM CONCEPTS, LTD.
NEW MILLENNIUM CONCEPTS, LTD.
Berkey
Water Purifiers
®
“Simply the Best”
Notes:
1)
2)
3)
ower chamber be run to
waste as well as the new water that is purified during the first 1
minute to also be run to waste.
When installing purification elements for the first time or
replacing used elements, always prime and condition the new
purification elements.
After cleaning elements, it is recommended that the elements be
re-primed. This will back-flush any process dust from the pores of
purification elements and prevent premature clogging.
4) Spigot style may vary slightly.
If the system is left to stand for more than 3 days, it is
recommended that any water left in the l
WARNING: Failure to read, thoroughly understand, and follow all instructions may result in personal
injury, water damage, or voiding of the warranty! It is the assembler’s responsibility to make sure all
components are properly assembled and installed using the instructions provided. While your
system should not have any leaking problems, there is always the chance that a leak
might occur due to being improperly assembled or perhaps a faulty part. In an overabundance of
caution, we recommend that for the first 24 hours the filled system be placed in an area wherein if
such a leak were to occur, the resulting spillage would not damage anything within the household.
Berkey
®
