New Light M-J8-50, Инструкция по эксплуатации

Страница: 3 / 10

-02-
Attention:
Function Instructions
1.Please do not open the bottom cover yourself without permission. Operated it accord the user
manual. Call the technician when the machine breaks down.
2.Please do not see the laser beam directly to avoid any damage.
3.Before connect or disconnect the power, please adjust the luminance of the laser diode to the
least to avoid any damage to the laser diode.
4.This unit should be keep dry, do not use in the rain and dusty environment. It can be use in the
outdoor with the water-proof cover protector.
5.Set the light immobility and try to avoid strong shake or hit.
6.Prevent dust into the equipment to avoid problems.
7.Please keep the there's no other equipment or decorating materials obstructed the exhaust fan
and the vent-pipe when the equipment was working.
8.Before connect power, check the plug is immobility or not, power line should be connect well.
9.Please do not open or close the equipment frequently that's to avoid any affect to the life span
of the laser diode, and try the best to avoid the long time working.
10.Due to the characteristic of laser diode, after four hours working, it should be close at least 25
minutes until the laser diode cooling then work again.
11.Don't touch the light or draw the power line when your hand was wet. And do not pull the electronic
power line.
12.Maintain the distance at least 3M above from the equipment to the object.
13.This equipment does not have any parts can repair for the users, please do not open the equipment.
14.When the laser diode became dim or damaged please contact the dealer timely.
15.when you want to retransfer the products, you'd better use the original package to shockproof.
:
1.If you put dip switch 10 to “on”, the light will be in auto-play mode.
2.Auto-Play/Master-Slave Function when the master machine put dip switch 10 to “on”, this light
will pay the fixed program automatically.
LED 8-Scan Laser Light Instruction Manual