manualshive.com logo in svg

New Leader Raven OMNiPOWER NL5000 G5, Руководство оператора, Страница: 27 / 268

Поделиться
Скачать
New Leader Raven OMNiPOWER NL5000 G5 Скачать руководство пользователя страница 27

- 26 -

www.NewLeader.com

(800) 363-1771

317314-C

Raven OMNiPOWER NL5000 G5

Informational Decals

3� NOTICE: CONVEYOR CHAIN TENSION

To avoid machine damage and premature deterioration:

•  Periodically inspect conveyor chain tension to ensure proper tension is maintained�

•  See “Lubrication & Maintenance” section of this manual for details�

1� NOTICE: SPREAD PATTERN TESTING

To obtain optimal machine performance:

Before spreading material, spread pattern tests must be conducted to properly adjust the spread 

pattern� Refer to the manual for adjustment instructions� A spread pattern test kit is available from 

your New Leader dealer�

Wind, humidity, rain and other adverse weather conditions can affect spread pattern, resulting in 

uneven crop growth and loss of yields�

THE MANUFACTURER OF THIS SPREADER WILL NOT BE LIABLE FOR MISAPPLIED MATERIAL 

DUE TO AN IMPROPERLY ADJUSTED SPREADER OR ADVERSE WEATHER CONDITIONS�

It is recommended that spread pattern tests be conducted prior to each spreading season, after 

any spreader maintenance, and periodically during the spreading season� Spread pattern tests 

must be conducted whenever a new product is to be applied�

2� NOTICE: CONVEYOR CHAIN LUBRICATION

To avoid machine damage and premature wear:

• 

 Conveyor chain life will be noticeably extended by periodic lubrication.

• 

Use a 75% diesel fuel and 25% number 10 oil mixture on the links and rollers.

•  Failure to keep the chain links loose and free running can result in severe damage to 

the conveyor chain, drag shaft, gear case, body structure, and is cause for voiding the 

warranty�

Содержание Raven OMNiPOWER NL5000 G5













































































































































































































































































Отзывы:

Нет отзывов