New Leader Hi-Way XT3 TYPE III, Руководство оператора

Страница: 14 / 94

- 14 -
www.NewLeader.com
(800) 363-1771
316536-AA-A
XT3 TYPE III
Header
Maintenance
General Safety Rules
READ AND UNDERSTAND MAINTENANCE PROCEDURES
Figure 3�1 - Read the maintenance and safety instructions and
understand them before performing any maintenance procedure�
Never perform any maintenance procedure or repair if the instructions
and safety procedures are not fully understood� Only trained and
qualified personnel should perform any maintenance procedure or
repair�
Never modify any equipment or add attachements not approved by
New Leader Manufacturing�
Figure 3�1
DO NOT SERVICE OR ADJUST MACHINE WHILE IN MOTION
Figure 3�2 - Never lubricate, service or adjust the machine or any of its
components while they are moving�
Never wear loose clothing or jewelry when working near machine
tools or moving parts�
Remove rings and other jewelry to prevent electrical shorts and other
personal injury when in contact with machine tools or moving parts�
Close and secure all guards removed for service� Check all screws,
bolts, nuts and fasteners for proper torques before operating
machine�
Figure 3�2
WEAR PROPER PROTECTIVE EQUIPMENT
Figure 3.3 - Wear close-fitting clothing and proper safety equipment
for the job�
Always wear eye protection when working on or around the machine�
Wear a suitable hearing protection device such as earmuffs or
earplugs to protect against high decibels or loud noises�
Prolonged exposure to high decibels or loud noise can cause hearing
impairment or loss of hearing�
Figure 3�3
Wear protective gloves to protect hands from cuts, abrasions and minor burns�