7
8
MODEL: NH40-6-CH
MODEL: NH40-6-CH
Operating Instructions
CLEAN THE APPLIANCE PARTS BEFORE USE
Remove the silicone gasket and the interior pot. Wash with water and a non-abrasive sponge and
cleaner. Dry the items. Reinstall the gasket and pot. Make sure the gasket is in tightly installed in the
interior of the lid (both behind and under the metal ring within the lid).
Look at the features diagram to guide you. Reattach the lid if it has been removed.
REMOVING THE LID
A. Removing the Lid:
Open the lid by inserting your hand under the molded plastic handle and
turning it to the left it will not move any further. The lid can be removed.
A. To reattach the Lid:
The lid can only be inserted one way. The back portion of the pot rim has a
black bar.As you can see the lid has a molded channel that fits over this bar. Line up the channel with
bar on the back of the pot rim. Carefully slide the channel so it slides over and engages over the bar.
Slide it all the way to the right.
Operating Instructions
OPEN/CLOSE POSITION OF THE LID
B.
You will know the lid is in the open position when the icons on the left side of
the lid line up next to the word open.
To lock the lid- insert your hand under the molded plastic handle and turning
it to the right. On the top right side of the lid you will see the icons line up
next to the word close (diagram of the triangle and gum drop). For the lid
to be in the open position the open triangle and the lid need to line up. For
the lid to be in the closed position the close triangle and the lid icon have to
line up. Knob counter clockwise and lifting lid up and off the appliance. Open
the lid by turning the lid knob handle counter clockwise and lifting lid up and
off the appliance.
INSTALLING THE SPOON HOLDER AND CONDENSATION CUP
C.
Install the spoon holder on the side of the pot by installing it in the black slot
which is located on the bottom right side of the pressure cooker exterior.
D.
The clear condensation cup is installed in the back of the lid in the opening
that corresponds with the size of the cup. This cup collects steam as it
condenses along the rim of the pot.
OPERATING INSTRUCTIONS
1. When plugging in the unit an alert will beep letting you know that the unit is
plugged in.
2. The display will show four blue zeros.
3. Open the lid by turning the unit to the left-counter-clockwise. You will hear a
clicking noise. (icons will be lined up)
4. Make sure the silicone gasket is fully installed in the lid and lies flat behind the
wire ring.
5. Insert the inner pot into the electric cooker base with your desired food to be
cooked. Pay careful attention to the maximum fill line for different types of food.
6. Close the lid by turning the lid to the right clockwise. You will hear a clicking
noise. (icons will be lined up)
Rod
Channel
OPENED LID
CLOSED LID
UNLOCK
UNLOCK
LOCK
LOCK
