New Holland Workmaster 25 Tier 4B, Руководство оператора

Страница: 125 / 198

7 - MAINTENANCE
Tighten Grease
Replace Adjust
Change fluid Drain fluid
Cleaning
Bleed
Check Test
Maintenance action Page no.
Tail light and brake light bulb - Replace
x
7-50
Turn signal and hazard bulb - Replace
x
7-51
Front wheels toe-in - Check
x
7-53
Belt - Adjust
x
7-54
Every 8 hours or daily
Engine lubrication system - Check
1. Before starting the tractor check the oil level using the
dipstick (1) .
NOTE: The dipstick is only accurate if the tractor is not
running and sitting on a level surface.
2. Remove the dipstick from the engine.
3. Wipe the dipstick with a lint-free cloth.
4. Insert the dipstick in the engine.
5. Remove the dipstick and read the oil level
6. The oil level should be between the (L) and (H) . See
figure 3
NHIL17CT01436AA
1
7. If the oil level is low, remove the filler cap (2) add oil
through the filler hole.
NHIL17CT01439AA
2
8. Add enough oil so that the level registers between the
two marks on the dipstick. Do not overfill.
93100903
3
7-9