New Holland TD65F, Руководство по обслуживанию

Страница: 31 / 41

INTRODUCTION
Pipe thread fitting torque
Before installing and tightening pipe fittings, clean the
threads with a clean solvent or Loctite cleaner and apply
sealant
L
OCTITE
® 567™ PST P
IPE
S
EALANT
for all fittings
including stainless steel or L
OCTITE
® 565™ PST for
most metal fittings. For high filtration/zero contamination
systems use
L
OCTITE
® 545™ .
Thread size Torque (maximum)
1/8-27 13 N·m ( 10 lb ft )
1/4-18 16 N·m ( 12 lb ft )
3/8-18 22 N·m ( 16 lb ft )
1/2-14 41 N·m ( 30 lb ft )
3/4-14 54 N·m ( 40 lb ft )
Installation of ORFS (O-Ring Flat Seal fit-
tings)
When installing ORFS fittings thoroughly clean both flat
surfaces of the fittings
(1) and lubricate the O-ring (2) with
light oil. Make sure both surfaces are aligned properly.
Torque the fitting to specified torque listed throughout the
repair manual.
NOTICE: If the fitting surfaces are not properly cleaned,
the O-ring will not seal properly. If the fitting surfaces are
not properly aligned, the fittings may be damaged and will
not seal properly.
NOTICE: Always use genuine factory replacement oils
and filters to ensure proper lubrication and filtration of en-
gine and hydraulic system oils.
The use of proper oils, grease, and keeping the hydraulic
system clean will extend machine and component life.
50011183
2
84574094A 19/10/2016
26