2
SECTION 00 - GENERAL - CHAPTER 1
84176561
- 03- 2008
NOTES FOR SPARE PARTS
Use exclusively
genuine NEW HOLLAND spare parts
, the only ones bearing this logo.
Only genuine parts guarantee same quality, life, safety as original components as they are the same as mounted
in production.
Only the
NEW HOLLAND genuine spare parts
can offer this guarantee.
All spare parts orders should be complete with the following data:
-
tractor model (commercial name) and frame number;
-
engine type and number;
-
part number of the ordered part, which can be found on the “Microfiches” or the “Spare Parts Catalogue”,
which is the base for order processing.
NOTES FOR EQUIPMENT
Equipment which NEW HOLLAND proposes and shows in this manual are as follows:
-
studied and designed expressly for use on NEW HOLLAND tractors;
-
necessary to make a reliable repair;
-
accurately built and strictly tested to offer efficient and long-lasting working means.
We also remind the Repair Personnel that having these equipment means:
-
work in optimal technical conditions;
-
obtain best results;
-
save time and effort;
-
work more safely.
NOTICES
Wear limits indicated for some details should be intended as advised, but not binding values. The words “front”,
“rear”, “right hand”, and “left hand” referred to the different parts should be intended as seen from the operator's
seat oriented to the normal sense of movement of the tractor.
HOW TO MOVE THE TRACTOR WITH THE BATTERY REMOVED
Cables from the external power supply should be connected exclusively to the respective terminals of the tractor
positive and negative cables using pliers in good condition which allow proper and steady contact.
Disconnect all services (lights, wind-shield wipers, etc.) before starting the tractor.
If it is necessary to check the tractor electrical system, check it only with the power supply connected. At check
end, disconnect all services and switch the power supply off before disconnecting the cables.
