New Holland T4.105V, Руководство по обслуживанию

Страница: 17 / 51

INTRODUCTION
− Tractor model (commercial name) and frame number.
− Engine type and number.
− Part number of the ordered part, which can be found in the “Spare Parts Catalogue” used for order processing.
Notes for equipment
The tools that NEW HOLLAND propose and illustrate in this manual are:
− Specifically researched and designed for use with NEW HOLLAND vehicles.
− Necessary to make reliable repair.
− Accurately built and strictly tested to offer efficient and long-lasting working means
By using these tools, repair personnel will benefit from:
− Operating in optimal technical conditions.
− Obtaining the best results.
− Saving time and effort;
− Working in safe conditions.
Important notes
Wear limit values indicated for certain parts are recommended, but not binding. The terms “front”, “rear”, “right-hand”
and “left-hand” (when referred to different parts) are intended as seen from the driving position with the tractor in the
normal direction of movement.
Moving the tractor with the battery removed
External power supply cables should only be connected to the respective positive and negative cable terminals, using
efficient clamps that guarantee adequate and secure contact.
Disconnect all services (lights, windshield wipers, etc.) before starting the vehicle.
If the vehicle electrical system requires checking, carry out operations with the power supply connected; Once check-
ing is completed, disconnect all services and switch off the power supply before disconnecting the cables.
47888374 18/07/2016
10