New Holland PS2045, Руководство по обслуживанию

Страница: 29 / 31

INTRODUCTION
IDENTIFYING THE CAUSE OF FAILURE BEFORE DISASSEMBLY
• Whenever possible, focus on making the complete di-
agnosis of the problem before starting disassembly.
• Take the necessary time for good previous planning,
avoiding unnecessary operations and/or part replace-
ments.
• Determine which tools, parts to be replaced and safety
precautions (and PPE) are required for the job.
• Make an overview about the system or component that
failed. See what precisely caused the failure and if
other adjacent components were not affected.
• During disassembly, inspect the parts carefully.
• Clean the parts to be reused.
BAIL14SE00803AU
20
DO NOT MIX PARTS
• When disassembling different assemblies, arrange the
pieces separately and logically.
• The ideal thing is to install all the parts in their original
location. There are special parts whose position cannot
be changed. Separate the different bolts and nuts in
"large trays" with divisions.
• The base of the tray, shaped like a grid or perforated
plate, allows the parts to be washed, draining the water
beneath it.
BAIL14SE00803AV
21
CORRECT USE OF TOOLS
• The general rule is: do not improvise! Inadequate tools
and procedures, apart from compromising the quality of
work, can cause injury.
BAIL14SE00803AW
22
47918066 10/09/2015
24