GENERAL
E385C
W5-1-6
7.
Definition of terms
Terms in this manual are defined as follows :
(1)
Direction
a. Individual unit
Front/back direction
The power input side is front and the output side is back.
Rotating direction
When viewed from the rear, the clockwise direction is right rotation and the counterclockwise direction is
left rotation.
Vertical direction
With a unit mounted on the machine main unit, the upward direction is upper and the downward direction is
lower.
Left/right direction
When viewed from the rear, the left direction is left and the right direction is right.
(2)
Standard value
⋅⋅⋅⋅⋅⋅⋅
Basic dimension excluding tolerance and clearance generated by tolerances when two
parts are joined
(3)
Repair limit
⋅⋅⋅
It is the value requiring repair. Symbol of + or - with the value means increase or decrease to
the standard value.
(4)
Operation limit
⋅⋅⋅
It is the value requiring replacement. Symbol of + or - with the value means increase or
decrease to the standard value.
(5)
Warning
⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅
It is an item that may result in risk of human life or serious injury by incorrect handling.
(6)
Caution
⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅
It is an item that should not be performed including inhibited work or an item that require
attention in working procedures.
(7)
Reference
⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅
It is supplementary explanation in work.
