New Holland SP Windrower Dual Windrow
Merger Attachment Specifications
Page 5 of 5
GENERAL INFORMATION
Mechanical design
Laterally-mounted, draper-belt conveyor; folds up under windrower belly frame when not in use, allowing single windrow or swath formation.
Merger folds down and forward (further forward at the left end) when deployed for merging application.
Movable deflector allows operator to control distance crop is thrown.
Crop delivery direction
Right side, behind right front tire
Windrower compatibility
Tier II, 6-cylinder models (non-draper) and all Tier III, 6-cylinder models (except with dealer-installed draper ready)
Windrower software requirement
7.1 or higher*
Header compatibility
15.5' and 18' disc headers with conditioning system
Belt construction
Single ply w/two ply edges; vulcanized endless construction w/vee-guide tracking rib on inner surface and lateral
cleats on the outer surface to positively move material
Belt tensioning
Adjustable spring tension to minimized shock loading
Belt tracking
Eye bolt adjustment at front end of driver roll
Merger conveyor flotation
Table can float upward to minimize damage in the event of an obstruction or obstacle
HYDRAULIC SYSTEM
Raise/lower-deflector- belt drive
Common system utilizing optional windrower-mounted auxiliary hydraulic system
Pump type
Windrower-mounted, fixed-displacement
Pump capacity @ rated speed, gpm
Tier II - 11.3 gpm (42.8 lpm); Tier III - 15.1 gpm (57.2 lpm)
Relief Pressure, psi (bar)
2000 (137.9)
Belt drive type
Fixed-displacement gear motor drive through #50 chain
Motor displacement, cu. in. (cu. cm)
1.53 (25)
Conveyor belt speed range, mph (kph)
7 - 13 (11.3 - 21)
Raise/lower cylinder, in. (mm)
2.5 (63.5) diameter, double-acting w/mechanical transport lock
Side deflector cylinder, in. (mm)
1.5 (38.1) diameter, double-acting
SIDE DEFLECTOR
Design
Top-hinged, formed steel deflector w/plastic lower extension to protect the deflector from damage in the event of hitting an obstruction or high-centering
Mounting frame
Horizontal (manually) adjustable to accommodate two sizes of headers and operator preference on windrow shape and width
OPERATOR CONTROLS
Raise/lower
Propulsion handle-mounted button control- fully up or fully down
Belt speed
Right-hand console mounted, two-action On/Off switch and variable speed toggle switch
Side deflector
Propulsion handle-mounted rocker-switch, variable position control
DIMENSIONS
Conveyor frame length, in. (mm)
77.4 (1966.2)
Conveyor frame width, in. (mm)
89 (2260.5)
Conveyor belt width, in. (mm)
42 (1066.8)
Conveyor belt length, in. (mm)
84.6 (2150) center to center of rolls
Belt roller diameter, in. (mm)
4 (101.6)
Ground clearance, operating, in. (mm)
Adjustable; 5 (127) recommended (continuous ground contact is not intended)
Ground clearance, transport, in. (mm)
28 (711)
WEIGHT
(merger attachment only; does not include aux. hyd. kit)
Shipping, lb. (kg)
1125 (510.3)
Operating, lb. (kg)
976 (443)
LUBRICATION
Grease points
50 hr. lube interval at 3 zerks
Drive chain
10 hr or daily interval; lube belt drive chain w/motor oil
OTHER REQUIREMENTS
Auxiliary hydraulic drive kit
Select Tier II (dealer installed) or Tier III kit (factory- or dealer-installed option)
* 7.1 is assumed to be the level that will be installed concurrent w/MY09 Job 1 at this time (3/08). MY08 units have 7.0 installed. Special software was provided for each of the pre-build units.
Software on those units need not be replaced, unless other issues would necessitate it.
Safety begins with a thorough understanding of
the equipment.
Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention
to
all
safety
and
operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Visit our Web site at
www.newholland.com/na
Or, call
toll-free: 1-888-290-7377
Design,
materials
and/or
specifications are
subject to
change
without
notice
and
without
liability
therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
