E265C-E305C
SAFETY INFORMATION
S1 - 8
ELECTRICAL SYSTEM
Pay attention to connect connecting cables to correct
poles (+ to +) and (- to -) at both ends. Do not short-
circuit terminals. Thoroughly follow instructions given
in Operator's manual.
Always move the key-start switch in the lock position
before servicing or repairing the machine.
Batteries contain SULFURIC ACID. Protect the eyes
when working near the batteries against possible
sprays of the acid solution. Should acid contact skin,
eyes, or clothes, RINSE IMMEDIATELY IN WATER
FOR AT LEAST 15 MINUTES. Immediately seek
medical attention.
Battery released gas is highly flammable. Leave the
battery compartment cover open during recharging to
improve ventilation. Never check battery charge by
placing metal objects across the posts. Keep sparks
or open flames away from batteries. Do not smoke
near the battery to prevent explosion hazard.
Before any maintenance or repair, make sure that
there are no fuel or electrolyte leaks from the
batteries. If any, correct prior to proceeding with
further work. Do not recharge batteries in confined
spaces. Ensure proper ventilation is provided to
avoid accidental explosions due to build-up of
explosive gas released during charging.
Disconnect batteries before working on the electrical
system or carrying out any other type of work.
HYDRAULIC SYSTEM
Pressure fluid escaping from a very small hole can be
almost invisible and still have sufficient force to
penetrate the skin. Always check any suspected
pressure leaks using a piece of cardboard or wood.
Do not use hands. If injured by escaping fluid, obtain
medical attention immediately or serious infection or
reaction may develop.
Stop the engine and ensure pressure is relieved from
all systems before removing side panels, housings,
guards and covers.
Always use gauges of adequate capacity for
pressure testing.
TOOLS
Always keep head, body, limbs, feet, hands, and
fingers away from the bucket and attachments, when
in the raised position.
Prior to any maintenance or repair work, install all
supports necessary to this aim according to local and
national safety regulations.
In case the attachment is to be operated for
maintenance or repair purposes, do so exclusively
while sitting in the driver’s seat. Sound the horn
before starting the machine or moving the
attachment. Require that nobody remain near the
machine. Raise the attachment slowly.
Do not use the machine to transport loose objects,
unless proper securing devices are provided.
Never use gases other than nitrogen to charge the
accumulators.