New Holland Discbine 313, Руководство по обслуживанию, Страница: 10 / 31

INTRODUCTION
Wheels and tires
Make sure that tires are correctly inflated. Do not exceed any recommended load or pressure. Follow the instructions
in the manual for proper tire inflation.
Tires are heavy. Handling tires without proper equipment could cause death or serious injury.
Never weld on a wheel with a tire installed. Always remove the tire completely from the wheel prior to welding.
Always have a qualified tire technician service the tires and wheels. If a tire has lost all pressure, take the tire and
wheel to a tire shop or your dealer for service. Explosive separation of the tire can cause serious injury.
DO NOT weld to a wheel or rim until the tire is completely removed. Inflated tires can generate a gas mixture with
the air that can be ignited by high temperatures from welding procedures performed on the wheel or rim. Removing
the air or loosening the tire on the rim (breaking the bead) will NOT eliminate the hazard. This condition can exist
whether tires are inflated or deflated. The tire MUST be completely removed from the wheel or rim prior to welding
the wheel or rim.
Driving on public roads and general transportation safety
Comply with local laws and regulations.
Use appropriate lighting to meet local regulations.
Make sure that the Slow-Moving Vehicle (SMV) emblem
(1) is visible.
NHIL13HT00312AA
1
Make sure that the brake pedal latch is engaged. You must lock brake pedals together for road travel.
Use safety chains for trailed equipment when safety chains are provided with machine or equipment.
Lift implements and attachments high enough above ground to prevent accidental contact with road.
When you transport equipment or a machine on a transport trailer, make sure that it is properly secured. the Slow-
Moving Vehicle (SMV) emblem on the equipment or machine is covered while being transported on a trailer.
Be aware of overhead structures or power lines and make sure that the machine and/or attachments can pass safely
under.
Travel speed should be such that you maintain complete control and machine stability at all times.
Slow down and signal before turning.
Pull over to allow faster traffic to pass.
Follow correct towing procedure for equipment with or without brakes.
48049004 14/11/2016
7
Find manuals at https://best-manuals.com