INTRODUCTION
Basic instructions (Daily inspection)
D150B XLT, With cab, Tier 3, Power Angle Tilt (PAT) Blade, Made in Brazil
[N9AC03000 - ]
LA
WARNING
Improper operation or service of this machine can result in an accident.
Read and understand the SAFETY INFORMATION Section before you perform any maintenance, ser-
vice, or repairs. Read and understand the specific service procedures for the components you plan
to work with before you start servicing the machine.
Failure to comply could result in death or serious injury.
W0138A
Every day, before starting work, it is necessary to inspect the machine and service certain of its components.
Overall
• Check for water or oil leaks.
• Check that all screws and nuts are correctly tightened.
• Wipe off any dust and clean off any accumulated debris (engine, operator's compartment, etc.).
• Check the tension and wear of the tracks.
• Check for damage.
Motor
• Check the oil level, and change the oil, if necessary.
• Check the level of coolant liquid.
• Check for clogging or damage to the radiator.
• Check the condition of the engine belts.
• Check whether the air filter restriction warning light is lit up on the instrument cluster.
• Check for water or oil leaks on the components.
• Check the condition of all fuel lines.
• Check the fuel level.
Others
• Check the hydraulic fluid level.
• Check that the hydraulic fluid is clean.
• Check the condition of all hydraulic lines.
• Check for electrical short-circuits.
• Check that all battery connections are properly tightened.
• Adjust the rear view mirrors.
• Check for fluid leaks in the cylinders.
• Check the condition of the implements.
After Starting the Engine
• Did the engine start correctly? Is the exhaust smoke normal? Any unusual noises?
• Check for abnormal noise on the hydraulic components.
• Check for water, fuel, or oil leaks on the components.
• Check the audible alarm devices, working lights and windshield wipers.
• Check that all hydraulic circuits are functioning correctly.
47998875B 21/05/2018
31
