New Holland 611TL, Руководство оператора

Страница: 21 / 46

Installing the loader
225581
19
4. INSTALLING THE LOADER
WARNING:
The loader must not be connected in series with
any other of the tractor's functions. Working
with the loader will require the full attention of
the operator.
WARNING:
Risk of crushing and pinching
Air in hydraulic hoses and cylinders can cause
erratic operation.
Run the engine at low speed and make slow
movements with the joystick to purge any air
from the hydraulic system.
CAUTION:
Risk of crushing and pinching
Keep hands and feet away from moving
components. Do NOT use your fingers to check
the alignment of holes or pins — use a mandrel or
a steel drift.
Fig. 40 The loader must not be connected in series with any
other of the tractor's functions.
Lift the loader up onto the subframe. Holes for attaching the
lifting hooks are found on the inside of the knee plates.
NOTE: Make sure loader locking pins are removed from
the loader bearing box prior to installation of the loader on
to the subframe.
NSL
MSL
Fig. 41 Hole for attachment of lift hooks.