Wifi GUI
The control of the amplifier is best with the controller connecting to a computer via the USB
interface. Wifi GUI with a computer is also provided as a potential control interface. However,
with varying Wifi fire wall policy, users may need to consult with their local Wifi administrator
to ensure proper connection can be made. As an added fun factor, the Wifi GUI can also be tried
with an iPod™ Touch device. The iPod™ Touch interface has not yet been fully tested. We will
continue to make effort when possible to improve this interface.
TA-7600 Controller
The TA-7600 Controller is designed for ease of use and minimal customer interaction. The bulk of
the control of the amplifier is intended to be accomplished either through the USB or Wifi GUI. The
Controller itself is equipped with the safety interlock and keyswitch. Below are diagrams of the
controller front and rear panels with a description of the function of the indicators and controls that
are available.
4
2
1
3
Figure 4. Front face of TA-7600 Controller.
1.
Communication Status: This light will remain green unless the Controller has no
communication with either of the remote control modules (USB or Wifi GUIs). If the
indicator turns red, make sure that the USB cable is connected to the amplifier and the PC or
that the Wifi module (iPod Touch) is within range and functioning properly.
2.
Amplifier On: Indicates that the Amplifier is powered and is turned on.
- 13 -
