Pergola Additional Materials List
Hardware
(in plastic bag)
NOTE: WE HAVE INCLUDED 10% EXTRA SCREWS BEYOND WHAT IS IDENTIFIED BELOW
All Screws Included with this Kit are Self-Auguring.
A.
Tube of Vinyl Weld Glue
(2)
B.
5/8” Self-Auguring Stainless Steel Screws
(72)
(to lock Louver Assembly to Steel Holder
Brackets )
C.
5/8” Self-Auguring Stainless Steel Screws
(24)
(to lock Rafter Hangers to Rafter)
D.
1 1/2” Self-Auguring Stainless Steel Screws
(36)
(for Beam and Rafter Joiners)
E.
1 1/2” Self-Auguring Stainless Steel Screws
(24)
(to lock the Rafter Hangers to Attached Beam)
F.
2 1/2“ Self-Auguring Stainless Steel Screws
(2)
(to fasten Turn Bar Holder to post)
G.
2 1/2“ Self-Auguring Stainless Steel Screws
(16)
(to lock Top and Bottom Columns to Wood Posts)
H.
4” Self-Auguring Stainless Steel Screws
(12)
(to lock Rafters to the Beams)
I.
4” Self-Auguring Stainless Steel Screws
(24)
(to lock Beams and Rafters to Posts)
J.
9” Stainless Steel Bolt Assembly with Nuts and Washers
(2)
(to lock the Column Tops to Beams)
K.
Turn Bar Holder
(1) * Found in Box 7
Extra Materials You will Need
(Purchase separately from www.newenglandarbors.com or retailer of our products)
If Mounting Pergola on Concrete or Wood Deck
J.
4x4x8 Pressure-Treated Wood Posts
(2)
(purchase at local building center)
K.
4x4 Bolt Down Bracket Kit
(purchase from www.newenglandarbors.com or a
retailer of our products)
Refer to bolt down bracket instructions for hardware requirements,
as they pertain to your application:
If mounting pergola onto an existing concrete surface:
•
1/2“ x 3 1/2” x 12“ Wood Shims (16)
•
1/4” x 2 3/4“ Cement Screws -
Countersunk Head
(6)
•
3/16” Concrete drill bit. Minimum 3“ long (1)
If mounting pergola onto a wooden/composite deck with AN ACCESSIBLE UNDERSIDE:
•
1/2“ x 3 1/2” x 12“ Wood Shims (16)
•
1/4” x ?“ Bolts and Nuts -
Countersunk Head
(6) (Length depends on blocking material)
•
1/4” Washers (6)
•
1/4” Wood drill bit. Minimum 3“ long (1)
If Mounting Pergola in Ground
L.
4x4x12 Pressure-Treated Wood Posts
(2)
(purchase at local building center)
M.
Concrete Ready Mix
(2)
(purchase at local building center)
Rafter/ Beam Support (Required)
N.
2x6x12 Pressure-Treated Boards for Beams and Rafters
(9)
(purchase at
local building center)
O.
2x6x6 Pressure-Treated Boards
(2)
(purchase at local building center)
P.
3/8” x 3 1/2” Lag Screw with Washers (6)
(purchase at local building center)
Q.
3/8“ x 3 1/2” Lag Screws (for wood wall) or Anchor Screws (for brick
or concrete wall)
(6)
(purchase at local building center, also purchase drill bit)*
*) Please consult your local building center for mounting anchors. These second set
of screws will be used to mount your wood beam / ledger onto your structure.
Refer to page 12 for more information.
Not to Scale
6
12 x 12 Flat Top Attached Louvered Pergola
www.newenglandarbors.com
J
H I
G
F
D E
C
B
A
K
M
CONCRETE - Ready Mix
Purchase Separately
Purchase Separately
K
N
J
L
Purchase
Separately
Purchase
Separately
Purchase
Separately
P
