New Cosmos Electric KS-7D, Инструкция по эксплуатации

Страница: 24 / 40

- 22 -
7-5. Maker Mode
All the items set in the Maker mode (e.g. alarm set value) are password-protected.
7-5-1. Maker Mode Activation
First, turn off the detector. Simultaneously press and hold the down the
▲
and
▼
and POWER
button for 3 seconds (two beeps) to activate the Maker mode. The software version is displayed then
all the LCD segments turn on, and finally
“775” starts flashing. Now the Maker mode is active.
7-5-2. Operating Time Refresh
This detector is designed to notify when a sensor needs replacement (refer to 8-1.6)
“Sensor
Replacement
”). Reset the operating time to zero after battery replacement.
1) Refer to 7-5.
“Maker Mode” (including the warning), enter the
Maker mode. Now
“775” is flashing.
2) Press the
▲
button twice (two beeps) to change the password
from 775 to 777. Now
“777” is flashing.
▪
Incorrect settings in the Maker mode may change the detector
’s specifications. Never
operate in a way other than as described in this instruction manual.
▪
Only a selected administrator should have the authority to make changes in the Maker
mode.
▪
Gas detection is not possible during the Maker mode. To exit the Maker mode and return
to normal operation, power cycle the unit before use.
WARNING
Before moving to the next step,
“777” must be
displayed. If this step is not taken, it may change
the detector
’s specifications.
WARNING
Password 775 flashing
Password 777 flashing
Maintenance
button
Main power switch
Software version is
displayed
All LCD segments
turn on
“775” flashes.
<Maker Mode activates>