1. When the device is put into standby (STANDBY) (6), press the CLOCK button (12). On
the screen, the clock time will flash.
2. Press setup button - the clock hours will start flashing on the screen. Use the scroll
buttons to set the time. Then press setup again. Minutes start flashing on the screen. Use
the scroll buttons to set the minutes.
3. Then press the CLOCK button again, the clock will switch to alarm time setting mode 1
(alarm 1): a flashing alarm symbol 1 will be displayed on the left side of the screen, the
alarm time will flash. Use the SETUP and scroll buttons to set the alarm time to 1.
4. Press the CLOCK button again. The clock switches to alarm 2 time setting mode (alarm
2). As above, set the alarm 2 time.
5. Once set, press the CLOCK button again. The clock enters the display state of the
current time.
In standby mode, the device screen will display the current time and symbols of the alarm
clocks currently on (alarms).
TURN THE ALARM ON AND OFF (alarm 1 and alarm 2).
The device has 2 independent alarm clocks (alarms). You can turn on one alarm clock or
two alarm clocks at the same time, set to different waking hours.
In standby mode, by pressing the ALARM button in turn, you can turn on: alarm clock 1 -
alarm clock 2 - both alarm clocks simultaneously - turn off the alarm.
The symbols of the currently enabled alarm clock will be displayed on the screen on the left:
alarm clock 1 / alarm clock 2 / two alarm clocks simultaneously / alarm clock off: alarm
symbols go out.
FUNCTION 'SLEEP' - SLEEPING - off after the set time has elapsed
When playing a sound, you can use the SLEEP button to select the time after which the
device will turn off automatically.
By pressing the SLEEP button one by one, you can select the switch-off time in minutes:
120 - 90 - 60 - 45 - 30 - 15 - SLEEP function off.
When SLEEP is activated, a function symbol appears on the screen: "Zzz ".
MUSIC BACKLIGHT 'PARTY LIGHT'
The device has a music backlight flashing in the clock of the music track. The backlight
turns on at a higher level of sound strength.
LISTEN THROUGH HEADPHONES.
1. Connect stereo headphones equipped with a Small Jack plug to the PHONE headphone
jack (18) on the front of the device.
2. When the headphones are connected, the sound in the speakers of the device will turn
off automatically.
3. When the headphones are disconnected, the sound in the speakers of the device will
turn on again.
