Rev. 02 del 24/07/13
9/14
–
A p p l i c a t i o n s
For each application press the handle directly on the skin, always to 90° in
comparison to the surface to be treated (perpendicular), so that to center the precise
point in which the pain or the inflamed zone are warned. If pathology is superficial
or cutaneous, hold the handle at 1-2 cms of distance from the skin; if the zone to be
treated is deep, press the handle against the skin so that to approach the desired
point
4.1.2
–
Point application
The head of the handle allows to treat a surface of some square centimeters. If the
zone to be treated is more extended with diffused pain/inflammation/swelling (ex.
cervical, back pain, cellulitis, etc.), apply the most proper program positioning the
handle on a point of the zone to treat; at the end of the program move the handle
on an adjacent point and restart the program. Repeat the operation so that to apply
the therapy on the whole interested surface.
4 . 2
– S e s s i o n s
Apply the laser therapy 3-4 times a week at alternate days up to the disappearance
or appreciable diminution of the pain. It is possible that with some particularly acute
inflammations, in the first sessions the pain intensifies and the inflammation slightly
increases; in this case increase the frequency of the sessions up to 5-6 a week.
NOTE: if after 10-15 sessions pain persists contact an expert physician
.
4.2.1
Ca p.5
– P O W E R S U P P L Y
H o w t o u s e p o w e r s u p p l y
Biolaser can be supplied by power mains voltage at 230V
50Hz, through the
external supply cable which is provided together with the device (see the section on
Technical Specifications).
In order to identify the and the power supply cable provided with the device,
see the chapter on “Technical Specifications”. The power supply cable must not be
replaced by people who are not experts, and especially must not be replaced with
any device different from those provided by the manufacturer.
