POWER SOURCE
Insert the small plug from the supplied
AC/DC adapter to the DC in jack on
the unit. Insert the other end of
A
NOTE:
Auto Power Off: if no audio signal is
continuously detected from BT,CD,
Aux in or Line in for more than 60 minutes, the unit will power off automatically.
C/DC adapter to the wall.
BATTERIES INSTALLATION (REMOTE CONTROL)
To replace the button cell:
1 Push the tab, then slide out
the battery tray as the figure
on the right.
2 Replace the old button cell
with a new CR 2025 button cell.
3 Close the battery tray.
PUSH
OPEN
CR2025
PUSH
OPEN
Lithium Cell
CR2025
3V
SC
UL
Lithium Cell
CR2025
3V
SC UL
BBATTERY PRECAUTIONS
Follow these instructions.
1 Use only the size and type of battery specified.
2 Be sure the follow the correct polarity when installing the battery as indicated in
the battery compartment. A reversed battery may cause damage to the device.
3 If the battery in the device is consumed or the device is not to be used for a long
period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
4 Do not try to recharge the battery not intended to be recharged; it can overheat
and rupture.
5 The batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
6 Clean the battery contacts and also those of the device prior the battery installation.
7 Do not mix different types of batteries together (e.g. Alkaline and Carbonzine) or
old batteries with fresh ones.
17
