Página 14
REMARK
: AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST TRACK FINISHES. IN THIS CASE, SELECT THE
AUTO-STOP SWITCH
TO “ OFF
“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY
POWER BUTTON
OR SWITCH BACK THE
AUTO-STOP SWITCH
TO “ ON “ POSITION TO
STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE ARM PARK.
PHONO ENCODING
8. PRESS
FUNCTION BUTTON
TO SELECT “PHON” ON DISPLAY
9. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
10. PRESS THE
REC BUTTON
, THEN USB OR SD ICON WILL BE FLASHING.
11. PRESS
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO SELECT DESIRED MODE (USB OR SD)
FOR ENCODING. THEN PRESS THE
REC BUTTON
AGAIN TO CONFIRM. AND THE SYSTEM IS STARTING
THE ENCODING MODE AFTER FEW SECONDSS.
12. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
13. THE “REC” WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
14. TO FINISH ENCODING:
PRESS
STOP
BUTTON
OR
REC BUTTON
, “REC” WILL DISAPPEAR, RECORDING AND
TURNTABLE WILL STOP OPERATION. PRESS
REC BUTTON
AGAIN, ENCODING AND TURNTABLE
WILL RESUME TO WORK.
PRESS AND HOLD
REC BUTTON
CONTINUOUSLY, “REC” WILL DISAPPEAR, RECORDING WILL
STOP OPERATION, BUT TURNTABLE WILL KEEP OPERATION. PRESS
REC BUTTON
AGAIN,
ENCODING WILL RESUME TO WORK.
15. TO HEAR NEWLY ENCODED TRACK:
PRESS
FUNCTION BUTTON
TO SELECT USB OR SD MODE.
PRESS
SKIP UP
BUTTON OR SKIP DOWN
BUTTON TO
SELECT THE NEWLY ENCODED
TRACK.
THE NEWLY ENCODED TRACK IS ALWAYS STORED AS THE LAST TRACK IN USB/SD.
DURING PLAYBACK FROM USB OR SD, PRESS
REC BUTTON
TO SWITCH BETWEEN TRACKS
ENCODED BY THIS UNIT OR OTHER TRACKS STORED IN THE USB (OR SD) ORIGINALLY.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO
-
THE RECORDING FORMAT IS PRESET AT – MP3
BIT RATE : 128 KBPS
AUX IN JACK & ENCODING
PRESS
FUNCTION BUTTON
TO SELECT “AUX” ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO DEVICE
(SUCH AS CD PLAYER) THROUGH THE
AUX IN JACK
. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE
CAN BE PLAYED THROUGH THE SYSTEM.
AUX IN ENCODING
7. PRESS
FUNCTION BUTTON
TO SELECT AUX MODE
8. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
9. PRESS THE
REC BUTTON
, THEN USB OR SD ICON WILL BE FLASHING.
10. PRESS
SKIP UP
BUTTON OR SKIP DOWN
BUTTON
TO SELECT DESIRED MODE (USB OR SD)
FOR ENCODING. THEN PRESS THE
REC BUTTON
AGAIN TO CONFIRM. AND THE SYSTEM IS STARTING
THE ENCODING MODE AFTER FEW SECONDSS.
11. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
12. THE “REC” WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
13. TO FINISH ENCODING, PRESS
STOP
BUTTON
OR
REC BUTTON
, “REC” WILL DISAPPEAR.
14. TO HEAR NEWLY ENCODED TRACK:
PRESS
FUNCTION BUTTON
TO SELECT USB OR SD MODE.
PRESS
SKIP UP
BUTTON OR SKIP DOWN
BUTTON TO
SELECT THE NEWLY ENCODED
TRACK.
THE NEWLY ENCODED TRACK IS ALWAYS STORED AS THE LAST TRACK IN USB/SD.
DURING PLAYBACK FROM USB OR SD, PRESS
REC BUTTON
TO SWITCH BETWEEN TRACKS
ENCODED BY THIS UNIT OR OTHER TRACKS STORED IN THE USB (OR SD) ORIGINALLY.
