E-3
LOCATION OF CONTROLS
E-4
CONNECTION OF SPEAKER BOXES
- UNWRAP THE SPEAKER-CORDS OF BOTH SPEAKER-BOXES AND INSERT THE LEFT/
RIGHT PLUGS INTO SOCKETS IN THE REAR OF MAIN UNIT.
- PLACE THE SPEAKER BOXES AS FAR APART AS POSSIBLE FOR BEST SOUND
EFFECT.
UNIT :
2. CD "STOP" KEY
3. FUNCTION KEY
4. CD "BACK" / TUNE - KEY
5. CD "PLAY/ PAUSE" KEY
6. REMOTE CONTROL SENSOR
7. LCD DISPLAY
8. CD "NEXT"/ TUNE + KEY
9. KEY
10. VOLUME - KEY
11. BAND/ FOLDER KEY
1. ON/ STANDBY KEY
13. USB SOCKET
14. AUX-INPUT SOCKET
15. MAIN SPEAKER (LEFT & RIGHT)
16. TOP TWEETER (LEFT & RIGHT)
17. FM-ANTENNA WIRE
18. HEADPHONE SOCKET
19. SPEAKER OUTPUT SOCKETS
(LEFT & RIGHT)
20. AC-CORD & PLUG
21. CD DOOR
22. CD DOOR FINGER-GRIP
12. SD-CARD SOCKET
REMOTE CONTROL:
1. ON/ STANDBY KEY
2. FUNCTION KEY
3. BAND KEY
4. MUTE KEY
5. NUMBER KEYS
6. STEREO/ MONO KEY
7. CD "BACK"/ TUNE - KEY
8. CD "PLAY/ PAUSE" KEY
9. CD "NEXT"/ TUNE + KEY
10. EQ/ DBBS KEY
11. FOLDER - KEY
12. CD "STOP" KEY
13. KEY
14. KEY
15. RANDOM KEY
16. CD "PROGRAM"/ MEMORY KEY
17. CD "REPEAT" KEY
18. VOLUME - KEY
19. TIMER KEY
20. ALARM KEY
21. SLEEP KEY
22. TIME/ SNOOZE KEY
17
18
19
20
22
21
1
2
4
3
5
6
7
11
9
10
8
12
13
14
16
15
16
15
REAR VIEW
TOP VIEW
POWER SUPPLY
- THIS SET WORKS ON NORMAL HOUSEHOLD AC-POWER.
- MAKE SURE THE SET VOLTAGE OF THE UNIT MATCHES YOUR LOCAL VOLTAGE.
- INSERT THE PLUG OF THE AC-CORD INTO A WALL OUTLET WITH AC-POWER.
- PRESS THE ON/ OFF KEY TO SWITCH “ON” THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED
"OFF". IT WILL EITHER BE "ON" OR "STANDBY MODE".
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE
SWITCHED OFF BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK
FUNCTION).
- WHEN IN STANDBY MODE, YOU CAN USE THE POWER SWITCH (ON REMOTE
CONTROL OR ON FRONT PANEL OF THE MAIN UNIT) TO SWITCH "ON" THE UNIT.
- TO CONSERVE ELECTRICITY, PLEASE SWITCH THE UNIT TO "STANDBY MODE" WHEN
NOT LISTENING TO RADIO OR CD MUSIC.
WHEN THE UNIT IS “ON” THE ENTIRE DIGITAL DISPLAY WILL BE LIT UP WITH
A “BLUE” BACK-LIGHT. THIS INDICATES THE HI-FI IS SWITCHED “ON”.
IMPORTANT : HOW TO TELL IF THE UNIT IS "ON" ?
PREPARATION OF REMOTE CONTROL
- REMOVE THE PROTECTIVE TRANSPARENT COVER WHICH WRAPS THE OUTSIDE OF
THE REMOTE CONTROL.
- REMOVE (GENTLY PULL OUT) THE PLASTIC "TAB" FROM THE BATTERY
COMPARTMENT AT THE REAR OF THE REMOTE CONTROL.
- TEST THE REMOTE CONTROL BY PRESSING THE ( ON/ STANDBY) KEY TO
CHECK THAT THE UNIT SWITCHES ON PROPERLY USING THE REMOTE CONTROL.
DIGITAL CLOCK FUNCTION
- THE SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED IN 2 SITUATIONS:
(1) WHEN THE SET IS IN "STANDBY MODE". (THE DISPLAY WILL AUTOMATICALLY
ALWAYS SHOW THE CURRENT TIME). IN THIS SITUATION THE BLUE BACKLIGHT
IS NORMALLY OFF (TO SAVE ELECTRICITY) BUT YOU CAN SWITCH ON THE BLUE
DISPLAY LIGHT BY PRESSING ANY KEY, (ON THE SET OR REMOTE CONTROL)
EXCEPT THE "ON/ STANDBY" KEY. THIS WILL ACTIVATE THE BLUE LIGHT FOR
APPROXIMATELY 5 SECONDS.
(2) WHEN THE SET IS IN "ON MODE" (THE BLUE LIGHT OF THE DISPLAY IS "ON" IN
THIS MODE, TO INDICATE THAT THE SET IS POWERED "ON"). IN THIS SITUATION
THE LCD DISPLAY NORMALLY DOES NOT AUTOMATICALLY SHOW THE CURRENT
TIME. BUT YOU CAN PRESS THE "TIME/ SNOOZE" KEY ON THE REMOTE CONTROL
AT ANY TIME TO SEE THE CURRENT TIME. EACH TIME YOU PRESS THE "TIME/
SNOOZE" KEY (ON REMOTE CONTROL) THE CURRENT TIME WILL BE DISPLAYED
ON THE LCD SCREEN FOR 5 SECONDS.
1
2
3
4
6
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
