INSTRUCTION MANUAL
WARNING :
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
“The marking information of main unit is located at the back of apparatus.”
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “ dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
SAFETY PRECAUTION
This appliance must be disconnected from the mains when not in use. Do not allow this appliance to be exposed to rain or
moisture.
CAUTION :
To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing
to qualified service personnel.
“This product contains a low power Laser Device”
IMPORTANT NOTES
“The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on apparatus.”
“To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.” as the
disconnect devices is the mains plug of apparatus.
“The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use.”
“Battery shall not be exposed to excessive heat such as sunshine, fire or the like.”
Warning statement for lithium battery:
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
PREPARATION FOR USE
INSTALLATION
Unpack all parts and remove protective material.
Insert the batteries into the remote control transmitter.
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
CONNECTION
3) Connect left and right speaker to left and right speaker jacks.
4) Before connecting the unit to the mains, make sure that the AC voltage printed on the back plate is the same as the AC
voltage from your wall outlet.
OPERATION / COMPACT DISC
Bear in mind the following points as dirt; scratches or warping of the disc can cause broken or intermittent sound and also noise.
When holding the discs, take care not to touch the playing surface.
Do not place disc in the following location: Near a heating device or place where temperature is high; in damp or dusty areas.
Wipe away any fingerprints or dust on the playing surface of a disc using a soft cloth. Always wipe from the inside toward the
outside of the disc.
