Nevir NVR-2758DVD-PTUB, Инструкция по эксплуатации

Страница: 25 / 28

A. Auto Search
Choose the Automatic Search options, This operation same the
First Time Installation. Refer to First time Installation.
B. Manual Search
If any channel is missing after auto search, or you want to add
newly launched channels, you can use
Manual Search to scan
the desired channels. To manually search the target channel, you
must know its parameters, e.g., the
.
Select <ENTER> button to start manual search
After the channel is found, it is appended to the current channel list
If no signal is found, a message indicating no signal will appear. Otherwise scanned
channel will be saved and appended to the current channel list.
C. System Setup
1) Language
Press the < DOWN > button to highlight the Language options, then Press the
< RIGHT >button to into the Language setup.
2) Area
Press the < DOWN > button to highlight the Area options, In the Area options, you
can choose a kinds of the Countries. As: England Germany, Italy, France, Spain etc.
3) Time Zone
Select an appropriate time zone to display the local time correctly.
4)
If you want to reset
stored channel
Frequency and Bandwidth
FTA Default Setting
your regional settings and clear all the , you can
select <FTA Default Setting>and confirm to reset it.
3.Favorite Function
In the DVBT mode, Press the <ENTER> , you will see the channel list, then
select your favorite channel, then press the <RANDOM/ADD> to add the
favorite channel. Or press the <PROG/DEL> to remove the favorite channel.
And then you can find the favorite list by press the <REPEAT/FAV> .
4.Trouble Shooting
If you have any questions, please consult the troubleshooting guide below.
Unit Not Working
Turn off the power, and then turn it on again.
Remote Not Working
Ensure the remote batteries are working.
Point the remote control directly at the player's IR sensor.
Remove any obstacles between the remote and the IR sensor.
No picture, no sound
Improper connection with AC adapter or Car adapter. Use of
unauthorized power supply. Power Switch is on OFF position.
No image
Whether antenna adjusted correctly;
Whether the correct Channel or Country selected.
May need to reset or search.
No sound
Whether the sound is turned to the end.
Whether earphone plugged in.
Whether press speaker button? Whether press mute button?
Diamonds in picture
Whether antenna adjusted correctly; Maybe too weak signal at the receiving place.
No signal
Whether the correct Country selected; Maybe signal too weak.
Dark picture
Adjust Brightness, Contrast correctly
Diamonds in picture orinferior sound during driving.
The signal too weak at that place
button
button
button
button
1)
2)
3)
4)
5)
6)
7)
8)
9)
9