nevins Bio Canvas Скачать руководство пользователя страница 6

Страница: 6 / 8

Bio Canvas Room Divider Assembly Guide

Assembly Instructions

Step 7:

Insert natural panel material, next the safety clips are installed around the edges

of the back frame in the indented locations, and then fi nally snap the front covers on Bio

Canvas frames.

Step 8:

If one-sided, then install back panel by placing the panel fasteners (SPC-15) as

illustrated below. Only use the center panel fasteners if the back panel is a whiteboard.

When applying the fasteners onto the metal frame and back panels, press on the fasteners

fi rmly for several minutes.

Allow 60 minutes curing time before attaching the back

panel to the frame.

You will hear an audible snap, verifying the fasteners closure.

Do not

reposition the back panel for 24 hours.

Step 9:

Use wheels/leg levelers to make room divider level by turning in or out.

Step 10:

To connect multiple room dividers see Appendix II.

Plastic Back Panels include (4) fasteners

White Board Back Panels include (8) fasteners

Plastic Back Panels include (6) fasteners

White Board Back Panels include (10) fasteners

Содержание Bio Canvas






