Copy
IMPORTANT:
It is vitally important that safety copies (backups) of all
snapshot/Recall files are made on a regular basis. The Copy
method detailed here can be used to do this by copying files to
either a USB or Network drive.
At any time you can recover the backed up files to the Genesys
from the external drive using the same method.
Note: Before running the recovery process on page Error: Reference
source not found please backup all snapshot/Recall files, otherwise you
will lose all your files once recovery is started.
The first thing to set when copying files from the Genesys drive is the
Destination location.
•
Pressing the
NETWORK
button opens another screen that allows
you to navigate to any location on an attached network.
•
Pressing the
USB
button opens another screen that allows you to
navigate to whatever is attached to the USB port.
To move files between locations, use the
NETWORK
and
USB
buttons to
set the upper window to the desired location.
u
In the lower window, navigate to the desired file & location.
u
Drag and drop the relevant file between the two windows.
It is the same operation regardless of whether you are backing up from,
or restoring to the Genesys drive.
u
Alternatively, right-click on the folder/file(s) to be copied and from the
fly-out menu select the
Copy
option.
u
Right-click on the destination location in the upper window and select
the
Paste
option.
A copy of the file will be placed in the destination location, providing a file
or folder of the same name does not already exist in that location.
If a file/folder of the same name already exists in the location you are
copying to, you will asked to either
Overwrite
the file or
Cancel
the
operation.
Delete
u
Select the file by clicking on it.
This could either be an individual Mix, Recall store or a higher level folder.
u
Press
Delete
.
You will be asked to confirm your actions.
u
Click
Yes
, and the selected file will be removed.
- 116 -
