
NZR 1.5 B3
GB
│
IE
│
NI
│
CY
│
7
■
Power supply
♦
Use a 1 .5 V battery
6
to operate the appliance .
To insert the supplied battery
6
proceed as follows:
1) Carefully pull the housing
7
off the hand set
4
and place it to one side .
2) Insert the battery
6
. Pay attention to the polarity
markings given in the battery compartment .
3) Push the housing
7
back onto the hand set
4
until it sits firmly in place and the gap is fully
closed . The anti-slip dimples on the housing
7
must be on the same side as the anti-slip dim-
ples on the hand set
4
. The writing on the
housing
7
must be on the same side as the slider
switch
5
.
NOTE
►
If the effectiveness of the cleaning starts to decrease, the
battery
6
needs to be replaced .
Handling and use
This section provides important information about proper hand-
ling and operation of the appliance .
Fitting the cleaning attachment
1) Remove the appliance head
1
by turning it slightly so
that the dot on the appliance head
1
is aligned with the
symbol on the hand set
4
. Then pull the appliance
head
1
upwards and off .
2) Push the attachment fitting
3
into the hole of one of the
cleaning attachments
2
in the storage box
8
. You will
feel a slight click .
3) Pull the hand set
4
away from the storage box
8
. The
cleaning attachment
2
comes out of the storage box
8
.
4) Check that the cleaning attachment
2
is firmly attached
to the attachment fitting
3
. If necessary, push the cleaning
attachment
2
onto the attachment fitting
3
with slightly
more force .
Содержание 324436
