-70
-28 -25
-80
OVERLOAD
LOW
XROC mode
When a Transmitter is sending a single audio channel,
consider activating XROC mode. XROC stands for “Extreme
ruggedized one channel”. XROC mode employs a different
modulation technique, which alters the data-rate. This
creates a wireless link which is less susceptible to RF
interference, while still maintaining the studio quality and
zero compression of the audio signal. To properly measure
the signal quality with XROC mode on, the RX signal strength
meter (RSSI) will scale to display a smaller “low” area,
adjusting for the increased headroom XROC mode provides.
XROC mode may be switched on and off individually from
any TX in the Edit menu.
