NEUTRIK opticalCON QUAD, Инструкция по эксплуатации

Страница: 3 / 7

opticalCON
E
opticalCON
opticalCON
D
3
D u r i n g i n s p e c t i o n p r o c e d u r e , m a k e s u r e
t h a t e a c h f e r r u l e i s c o m p l e t e l y f r e e o f d u s t .
A s a r e f e r e n c e t h e f e r r u l e h a s t o l o o k a s
i l l u s t r a t e d o n P i c t u r e B .
BDA 522
Dry Cleaner 1.25 mm
(FOCD-DC125)
Insert the video probe tool into our NEUTRIK FOCD-
STQ service tool (D).
To inspect the LC ferrule surface focus the video
probe by rotating the focus wheel (E).
Clean the LC surface with the Dry Cleaner 1.25 mm
over the NEUTRIK QUAD service tool.
Push back and forth the dry cleaner to start the
cleaning procedure (F). An endless lint free tape
removes dust particle on the ferrule surface of the LC
connector.
Check the condition of the LC ferrule surface again
and if necessary repeat step 7.
1.4
1.5
1.6
1.7
1.8
F
Picture A: Picture B:
I
HANDLING INSTRUCTION ® optical CON QUAD