optical
CON
Chassis Cleaning Instruction
Page 2
BDA 636 V1
®
optical
CON
QUAD Chassis Cleaning
Insert the Inspection Adapter into the FOCD-STC.
®
Insert the unit into the Neutrik opticalCON chassis
NO4-FDW-A
Use the appropriate tip for the video probe
according to the matrix on the last page.
Then inspect the LC surface.
After inspection remove the inspection adapter and
clean the LC surface with the Dry Cleaner 1.25 mm
Check the condition of the LC ferrule surface again
and if necessary, repeat step C and D.
®
optical
CON
MTP Chassis Cleaning
®
®
Insert the FOCD-STC in to the Neutrik opticalCON
NO12FDW-A or NO24FDW-A chassis.
Use the appropriate tip for the video probe
according to the matrix on the last page.
Attention:
®
Due to the 8-degree angled MTP singlemode
ferrule. It is not possible to inspect singlemode
®
MTP ferrules.
®
Currently only MTP Multimode ferrules can be
inspected.
C
D
E
2.
Dry Cleaner
F
3.
G
Video probe tip
C
D
E
F
G
