CLEANING INSTRUCTION
®
optical
CON
Chassis Connector
Cleaning Adapter FOCD-STC & FOID-STQC
R
Cassis Cleaning / Inspection
CAUTION:
Laser radiation, do not look directly into beam of light!
Intervall:
every 500 matings recommended
®
Tools:
Neutrik Chassis Cleaning Adapter:
FOCD-STC / FOID-STQC
Dry Cleaner:
FOCD-DC125, FOCD-DCM
Optical fiber video probe
®
optical
CON
DUO Chassis Cleaning
®
Insert the FOCD-STC in to the Neutrik opticalCON
NO2-4FDW-A-* chassis.
Use the appropriate tip for the video probe
according to the matrix on the last page.
Then inspect the LC surface.
After inspection clean the LC surface with the Dry
Cleaner 1.25 mm.
Check the condition of the LC ferrule surface again
and if necessary, repeat step A and B .
Page 1
BDA 636 V1
LASER
1
The sealing shutter mechanism of the optical
CON
avoids contamination of the LC ferrule locked inside.
®
The dust-proof design reduces maintenance intervals to a minimum; if nevertheless necessary,
follows the maintenance procedure below to avoid damages on the due to inpropes cleaning.
1.
Video probe tip
Dry Cleaner
A
B
A
B
